Originally Posted by
jkirkwood
I ran last night on a 30'x50' track. Here's my settings for watch the paint dry 17.5 1/12th/1s lipo:
- 0 deg motor timing
- 15 deg boost
- Turbo max
- 5 neutral width
- Throttle Profile 4
- .2 turbo delay
- 79.9 mm rollout
I may have been geared a few mm too high. Should had probably ran a 77mm rollout in the main. Although I did have very little drop off through the run. My motor temp was 132 deg after the main.
Thanks for the post. I'll experiment with some of your settings and start building a better setup than I've been using.