Originally Posted by
YR4Dude
Okay, I checked my chassis on the board today and despite cranking on the screws in the bulkheads to force the pins in, the chassis didn't tweak. If I had reamed the holes lightly, the chassis would have assembled easily without any complication. I will remember to do that next time.
I do want to say that the hard anodizing did a good job. After a days worth of runs, I took a rag with Nitroclean and wiped the bottom of the chassis clean and saw that the anodize coating is still very much intact. So the plating is good and wears well so far.