R/C Tech Forums - View Single Post - Modifying an esc to work with 3s lipo
Thread: Modifying an esc to work with 3s lipo
View Single Post
Old 11-21-2009 | 09:29 PM
  #7  
burnineyes
Tech Elite
iTrader: (17)
 
Joined: Apr 2009
Posts: 3,055
Default
The weak point of most ESCs is the BEC, it has to step down high voltage to a usable amount for the receiver. This is where lots of heat is generated because heat is the only way to get rid of the extra power.
burnineyes is offline  
Reply