Originally Posted by
IndyRC_Racer
The Model Masters lacquer based paint does stick to lexan and is flexible. However, it doesn't bond the same as the Pactra paint made for lexan. If you are using the Model Masters lacquer based paints (I use the rattle cans), I would recommend scuffing the inside of the body where you paint. I would also recommend cleaning the inside of the body with mild dish washing soap and hot water. If you properly prep the body, use light coats, and allow the paint to cure between coats (I speed up the process with a hair dryer) you should have no issues using this paint. As an extra precaution I usually back the Model Masters paint with Pactra paint, but that isn't necessary.
i like the old school and new school....same paint scheme and make and model....but I cant help think Ive seen that before...hummmm lol