R/C Tech Forums - View Single Post - Anyone use lrp sxx tc for spec??
View Single Post
Old 11-12-2009, 10:44 AM
  #3  
AndysD8
Tech Regular
iTrader: (40)
 
Join Date: Sep 2009
Posts: 476
Trader Rating: 40 (100%+)
Default

Originally Posted by chicky03
It will work perfectly fine. You'll want to use profile 10 for the power profile. Compared to others speedos with rampup timing speedos(spx, tekin etc) you'll have to gear higher because of the lack of extra timing. I have tried both ways in 13.5 and there is really no difference in laptimes as long as you get the gearing correct with both on a duo.

With the new X12 spec motors you'll be perfectly fine with the SXX as the motors are so fast the ramp up timing speedos are not needed. In 13.5 and 10.5 we have found that profile 10 on the SXX and profile 6 on the SPX are as high as you will want to go, any higher and you need to fully retard the timing on the motor and gear down at least 10 teeth. Even then it is still too timing on the speedo.

Hope this helps!

Paul
thanks! That's what I was wanting to hear! Ad I'll actually be using a duo, well a duo 2, but from the sounds of it I should be fine.
AndysD8 is offline