R/C Tech Forums - View Single Post - T.O.P. Racing "Photon" 1/10 EP Touring Car
Thread: T.O.P. Racing "Photon" 1/10 EP Touring Car
View Single Post
Old 11-11-2009, 09:00 AM
  #2728  
mrrcguy
Regional Moderator
iTrader: (25)
 
mrrcguy's Avatar
 
Join Date: Mar 2007
Location: Jonesboro Akansas
Posts: 3,157
Trader Rating: 25 (100%+)
Default
Originally Posted by mrrcguy
Here is what I have come up with for high bite carpet. I ran this at Trackside last week with good results. The layout was nice and flowing and the traction was very good.

Only two guys have managed 27 lap runs (5 minutes) on the layout and this set-up brought me to a 26 5:01.26 Im 100% confident that I have a 27 lap set-up in steadier hands.

There is an error on the sheet that I will fix and re-post ASAP. For the suspension mount spacers in the front it should read FF=2.3mm / FR=1.4mm
Originally Posted by Ron Goetter
Why are you running 1mm of inboard toe-in in the front?
Also why only 1* of rear toe on rubber tires?

I finally got around to editing my set-up sheet. Thanks Ron for pointing out the errors.

Here is the latest.
Attached Files
mrrcguy is offline  
Reply