R/C Tech Forums - View Single Post - charging two 1cells as a two cell
Thread: charging two 1cells as a two cell
View Single Post
Old 11-09-2009 | 06:18 PM
  #7  
GLwagon's Avatar
GLwagon
Tech Master
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,282
From: Baraboo
Default
I know my Blinkie discharges around 0.3amps...
If it were me I would aim for 0.02v cell imbalance or less.

I've seen my own junk packs with 0.02v difference after a run, & that's no problem recharging.

You could likely go higher, but with out testing & monitoring I couldn't tell you how much.

This little guy is quite handy...
http://www.hobbycity.com/hobbycity/s...rger_System_6S

I see they replaced it with their own...
http://www.hobbycity.com/hobbycity/s...edic_System_6S

other than having to push "balance" on startup every time, my MKS works great.
Last edited by GLwagon; 11-09-2009 at 07:34 PM. Reason: Droped a zero
GLwagon is offline  
Reply