Originally Posted by
Slideaway
I guess there's no miracle to expect with a 17.5, whatever the speedo you use...
It is probably the radio, tekin speedo software setup combination that I really need to work on....I mounted my speed passion GT2 speedo with the same car and motor and everything it just went fine....just I won't have the TURBO thing. That Tekin Turbo thing is just insane but I have no idea what happened to the rest of the stuff...
Originally Posted by
Pro10noob
Hmmmzzzzzzzzz
what am i doing wrong that i can't get my belts to skip??
At the moment i am running LRP SPX stock spec with GM 13.5 and lipo with a FDR of 5.05 indoor and no skipping is present from any belt.
Don't use the front belt tensioner and moved the front tensioner bearing to the side to get it more losen up and still no skipping
.
Other car is with GM 10.5,GM 90 with 8 into 3 mode and 5 cell and a FDR of 4.54.
This car is ran outdoors and for the first time i ripped a front belt but that was due to small debree comming in the front spool poelie.
Runs very fast and also no skipping of belts???
@ Solara, try the TM springs and then purple front and the pinkish at the rear for indoor.
Lots of tracktion and no roll if you use the front swaybar.
I use Tamiya 400 oil in the shocks front and rear with standard pistons in the shocks,epa off steering at 65% and sorex 28 front and sorex 24 at the rear.
If you can use it prepair your tire with tracktion fluid on the rear complete and at the front just the inside part of the tire and i also use tire warmers when permitted.
You then have tracktion from the beginning till the end
cheers Roy
I ran the car full summer outdoor and the side belt was OK...but once it is back to indoor carpet, with the extra traction, and because it is indoor and smaller, I think I can actually hear the belt skipping...so I changed to the K-factory one and problem solved.
Also, I am using Tamiya Blue shocks, with all the regular springs collection I have from Tamiya, Xray, Schumacher...etc, as long as you are using the TC5 spring lower plate, all the regular springs will work.
Originally Posted by
cheehtae
If you don't like the v200 version, try going back to the older version which is 198....
I have to trouble shooting about what is going on with the speedo/radio setup...other ppls with 200 is a rocket, mine (I have other ppl drove my car) is totally unacceptable...they all say it is something wrong with the speedo setup (it is the setup from the electronics, not that the speedo is broken cause that TURBO WIND sound is not even funny if I keep holding the throttle for more then 2 seconds...)