hi there,
thanks seb for your reply.
I will add some information to the batterie stuff.
Yoou will have different possibilties.
1. Using our LiIo 1800mAh
This fits perfectly and if you are running a KoPropo or a Futaba Reciever
you can use it without a regulator
If you are running Sanwa, LiPo, LiIo is not recommended.
2. Using our NiMh 5 Cell pack with one cell at the outside
3. You can use a 4 cell NiMh
4. Check out the available LiPo packs that will fit
The meassurements should be 18,5mm high, and 65mmx39mm
That will be the space you will have for the batterie.
The 18,5 is messured with the fuel tank mounted in the lowest position.
So if you need a bit more you can higher the fuel tank a little bit.
Thats it
Alex