R/C Tech Forums - View Single Post - Set-up Sheets
Thread: Set-up Sheets
View Single Post
Old 02-04-2002 | 06:15 PM
  #13  
daniz24's Avatar
daniz24
Regional Moderator
 
Joined: Aug 2001
Posts: 3,189
From: D-Square Racing
Default

Name : Danny
Track and Layout Type : 1st Series in Bandung (Feb 3rd)
Car : Yokomo MR-TCSP

Front
Shock Length : 60.3 mm
Shock Position : Standard
Camber Link : Standard
Piston : #3
Spring : Green
Oil : #400
Roll Bar : 1.2 mm Upper type
Camber : -1.5
Castor : Standard
Front toe : 0
Ride Height : 6 mm
Width : Standard

Rear
Shock Length : 60.3 mm
Shock Position : Standard
Camber Link : Standard
Piston : #3
Spring : Green
Oil : #400
Roll Bar : 1.2 mm
Camber : -2
Rear toe : -1
Ride Height : 6.5 mm
Width : Standard
Wheel Base : Short

Tire : Sorex 32R
Insert : Yokomo 039F
Wheel : RJ Ride 6 Spokes

Body : Yokomo Stratus Type B
Wing : Standard
Front Drive : Oneway
Center Drive : Oneway
Speed Control : GMV12XC
Motor : Reedy Ti 8 Double
Brush : Reedy Quasar (#729)
Timing : 6 mm
Gear Ratio : 81/19
Batteries : Sanyo RC3000
Traction Additive : Paragon FXII

Comments :
Tire Warmer (weather problem)
Current Limiter set to Maximum
Reduce slops for more consistant driving
Switch to Sanyo HV immediately based on last race !!!

Last edited by daniz24; 02-04-2002 at 06:19 PM.
daniz24 is offline