R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 10-29-2009, 02:27 PM
  #32579  
adam lancia
Tech Addict
iTrader: (2)
 
Join Date: Jun 2005
Location: Halifax, Nova Scotia, Canada
Posts: 727
Trader Rating: 2 (100%+)
Default

Originally Posted by SlowerOne
In the UK there are no Rules about replacing the Deans plug. Some drivers (including me!) have done so - I have replaced mine with 3.5mm plugs.

I made one wire much shorter than the other, and one lead from the speedo longer than the other. This way, it is very difficult to plug them together the wrong way round. The huge advantage of the Deans is you cannot correct it the wrong way round. As most speedos these days don't have polarity protection, the problem with changing to barrels is that you might, one day, release the smoke built into your speedo! I hope my set-up will keep my smoke capsules intact!! HTH
Thanks for the input! I was thinking of a piece of black and red shrink wrap around the respective tubes, therefore, keeping the magic smoke safely contained inside the ESC Just gotta remember not to go colour blind......
adam lancia is offline