R/C Tech Forums - View Single Post - Serpent 733 1/10 200mm touring
View Single Post
Old 10-22-2009, 07:20 AM
  #1409  
dj apolaro
Tech Elite
 
Join Date: May 2005
Location: Miami, Fl.
Posts: 2,433
Default

Originally Posted by howardns
D J what would be a good starting set up for kissimmee raceway ? your homestead setup or ft myers mostly so i can build shocks ahead of time.
thanks howard
I think I will use my Fort Myers set-up, but I will change the following. I will start with 900wt front shock oil, 50k rear diff, 2mm washer under the rear camber link and take out 1mm under the front arms to lengthen the front of the car. I will leave the caster the same, so I will actually have 1mm of more caster.

I am doing this since the turns at Kraceway are larger and more flowing turns. We will see how it works, plus I will be there if you have any questions or need help.

Hope this helps,
DJ Apolaro
dj apolaro is offline