Originally Posted by
David Wall
Got a freind that just got an M11, he is trying to change from model 1 to model 2, but when he tries, it says display mode only. I tried to make my M11 do it, but no luck. Any idea on what he is doing wrong or what would cause this? As is he can only run 1 car with his radio.
Thanks
Hey,
What he needs to do, is start the transmitter in Display Mode, this is done by holding the "Display" slider on the front of the radio over the the right for about 3 Seconds, and it will turn the radio on, and from there, choose Model Select function and you can change between models. To turn the radio off, push the slider over for about 1 second and let it go, and the transmitter will be off.
Then you can resume by just using the normal On/Off Switch on the Radio, but whenever you need to change model, you always need to do that
Hope this helps,
Ryan.