Here's Pucho/Alex Lopez's setup from the US Indoor Carpet Nats
Originally posted by pucho
Rob what's up? Hey can you get in contact with Alexe's Dads store they want to get some of the bumpers. TQ hobbies (407) 339-1899.
everione: the bulkheads are not the the 1/12 ones (at least it's not what I was told) they will most likely show up as an option and maybe in a re-incarnation of the car.
here is the set up.
front:
Violete springs
30wt oil
2 holes open
blade sway bar set at 60 deg.
shocks mounted on outer hole on arm
#3 hole on tower (carpet tower)
6deg caster blocks
0 Kick up
standard roll center
1.5 deg camber
droop ser to 2 on hudy blocks
camber link mounted on new hole on bulhead spaced 4mm up. (Andres Mayberg was using the standard hole on tower)
4mm ride heith
Jaco purple/orange at 2.25"
0 toe
diff set medium
Rear:
Violete springs
30wt oil
2 holes open
No sway bar
shocks mounted on #4 on tower and middle hole on arm.
camber link on inner hole on block and standard hole on bulkhead.
0 deg kick up
standard roll center
2 deg of camber
droop set to 4 on hudy blocks
1 deg tow in
4mm ride heith
Jaco purples at 2.25"
Stratus 2.0
Paragon: Hole in rear half in front
the front tires was cut down 1/2 mm so they would not touch the lower shock mount.
they used the stiff upper plate