Originally Posted by
rammstein88
here is mine. the forward tranny bracing location was re-located to the front brace thing that hold the servo down. testing tomorrow at the track
I did the same brace to mine as well on the truck and buggy. Rear trans to longer screw in servo mount. Very stiff. I also have graphite T Pivot plates on both my vehicles as well.
I use this to secure the battery. It's the battery tray from a Axial crawler. It's steel, so adds a little weight right under the battery, and as it mounts using 2 screws, I have a couple locations drilled so I can move the battery forward and back depending on my mood.
