Originally Posted by
protc3
I need to get some machines running now as i just got into the shop. Please post your setup and i will post suggestions and answer your questions shortly
F:
.22
~5deg blocks (R5 front end which is set more or less at the same config as my L4 was).
Flat Servo
3.5mm height
-1 - -1.5 camber
Black Fronts
R:
Red spring, 60wt oil in silvia shock, with front shock mount moved backwards almost all the way and with the mounting position in the tall setting.
Standard flex plates, in long position
Tubes with Sure Lube 3 on em
Yellow Rears
3.5 - 4mm ride height
1mm droop