spektrum instructions

1. Make sure the transmitter and receiver are turned off.
2. With the receiver off, press and hold the bind button on the receiver.
3. Turn on the receiver while holding the bind button.
4. Release the bind button when the LED flashes green.
5. With the transmitter off, place the transmitter sticks and auxiliary channels in their desired fail-safe positions, normally brake and straight ahead steering.
6. Press and hold the bind button on the transmitter module.
7. Turn on the transmitter while holding the bind button.
8. Release the bind button after the green LED flashes.
Observe that after several seconds the LED on the receiver and the LED on the
transmitter will quit flashing and remain solid, indicating that the binding process
was successful. Once binding is complete, the system will automatically connect.