R/C Tech Forums - View Single Post - TA-05 ver.2
Thread: TA-05 ver.2
View Single Post
Old 10-10-2009, 01:12 AM
  #256  
bl4
Tech Addict
iTrader: (5)
 
bl4's Avatar
 
Join Date: Apr 2009
Posts: 528
Trader Rating: 5 (100%+)
Default

Originally Posted by cheehtae
loosen your rear diff a bit, maybe it's too tight. Front diff should be a little tad tighter than your rear. also ck your spring rates.
Check on the diff but still the same. Try putting 3mm spacer on the rear separate suspension mounts, 3mm spacer(inside), 1mm spacer(outside)for the rear upper arm, front yellow spring & stabilizer, rear red spring & stabilizer, 2mm spacer front upper arm. suspension mount front - 0 , rear - 2.5. Any comments?
bl4 is offline