2.4GHz allows for the potential to maximize the speed of communication.This is the Eurus' imposed mission. This system begins with DDS, and then the steering and trigger maturation of advanced materials conveys the maximum possible fine fingertip control.The new weapon converges its power. Direct Digital System(D.D.S) 3D Adjustable Trigger Flat Sponge Steering D.D.S. Corresponding Receiver KR-409S Function Display Setting Module Support The EX-10 Eurus and RF-902S system is an all-digital communication signal process.The new system employs h i g h - q u a l i t y communication by removing the data and time loss due to digital to analog conversion.The result is 300% better response when compared to a conventional system. Putting you in control as you imagined it to be. Expect it to start shipping in December.


Features:

● New version RF-902 series 2.4G module

● Direct Digital System

● Speed about 3times faster than previous version

● 4WS mixing capabilities

● Compatible ＦＭ・ＡＭ・ＡＤ module

● 40 model memory support.

● 3CH and 4CH allow for additional mixing capabilities. 1/5th scale and crawler capabilities are covered similar to full-scale cars.

● Neutral Brake: The transmitter can control the neutral brake or roll at neutral when using a brushless motor.

● The three upper LED lighting on the body of the transmitter can be assigned to features.

● Steering, Throttle, Model and Options are displayed in a new program to quickly access the required

● Intelligent Recognition Module

● Standard equipment, Ｄ.Ｄ.Ｓ-2. 4 ＧＨ z-module "RF-902SM"









● DDS- RF902S/SM module & KR409S receiver ONLY for EX-10 Eurus


● D.D.S. Corresponding Receiver KR-409S
DDS KR-409S uses the traditional size and weight and comes compatible.Reasonably will fit in a wide range of chassis


● Setting Module Support
ICS settings can be performed through the module pack as the multi setting adapter.The Eurus body, PDS series of servos and VFSseries of ESC can be set up.(Optional card required . #6107,#61008,#61017,#61021)The Eurus body automatically displays the corresponding menu module that is attached through its intelligent identification.


● 3D Adjustable Trigger
Newly designed 3D trigger allows for moving the brake trigger. Fingers of different sizes and
operation are supported by the ideas from KO.


● Function Display
Steering, Throttle, Model and Options are displayed in a new program to quickly access the required functions and classified features. Traditional and additional new features are supported.