does anyone know how i can make my epa on throttle work in settings i can use ,because now with my epa on throttle needs to be set at 0,and my throttle opens up about 80 % ,i have adjusted subtrims up and down with no succsess ,any way i can somehow make epa be about 80 when my throttles fully open ??,i have even done a system reset still no sucsess
I think I understand what you are asking and will answer accordingly.
I would set your Throttle EPA to 80% first. Then I would remove the horn on your throttle servo and with the car/radio turned on hold the throttle on your radio all the way down.
Reattach your horn so that your carb is fully open while the throttle is still held.
Then when you let off the throttle your carb should close, and when you hit the throttle again you will have 80% travel and a fully open carb.
Hope that helps.