Originally posted by InitialD
I think that is not possible with the suggested link length of 44.5 mm. What length are you using?
I made a mistake.....
The arm needs to be at
90 degrees to the servo not the link. That is the optimum setting to get left/right as close as possible. I'll go back and edit my previous posts.
You may need a shorter link than what is in the manual. If nescessary cut the ball ends and the link a little. Or you could see if you have a 705 rear sway bar link around. They were made with a m3 threaded rod that may provide a way to a short steering link.