R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 09-23-2009 | 04:55 PM
  #8701  
mattwoodcraft's Avatar
mattwoodcraft
Tech Elite
iTrader: (10)
 
Joined: Jul 2004
Posts: 2,747
From: perth / australia
Default

Originally Posted by badrun
hi guys just a quick Q for those who are running 66 most off yous have seed that on LSN you gone in about 1/4to1/2 i have gone in about 2 and1/2 turns to get a good take off is this going in to far and HSN is still flush I'm running 25%amain and grp 5 plug clutch 3 aluminum shoes 2 with 1.1 springs and 1 with 1.0 on it the clutch is what mm sales getting good tank time and good smoke at full throttle have tried osp3 and p4 the grp just seemed to work well and running go pipe that comes in combo i think its the 2072 and header that come with it and will be running it on 25%blue dot soon sorry not a quick question
cheers jason
i wouldnt be to concerenes as long you have plenty of smoke still also weather will depend alot on the tuning on the particular day to , also if you leave your high speed needle flush you will end up leaning the bottem end a whole lot more anyway as you are letting more fuel flow past the HSP needle if that makes sensce ...

if your want to know more have a look an massives web site mate it will give you a guied
mattwoodcraft is offline