R/C Tech Forums - View Single Post - Low Voltage Cut-off Recommendations
Thread: Low Voltage Cut-off Recommendations
View Single Post
Old 09-15-2009 | 06:43 AM
  #12  
racer1812's Avatar
racer1812
Super Moderator
iTrader: (31)
 
Joined: Nov 2008
Posts: 15,743
From: RIP 'Chopper', 4/18/13 miss you bud:(
Default
Originally Posted by suparajicon
I bought time ago a Novak Smart Stop I haven't use yet. My question is, if the ESC ( I would use a Keyence Straight ESC and on of those cheap Tamiya TEU esc's) says the max voltage is 7,2 and Lipos have 7,4, will the receiver or the ESC's be in danger?Is it safe?
You're jacking this guys thread but you won't have a problem with a 7.4 lipo. The 7.2v on a nimh and the 7.4v on a 2S lipo are nominal voltages, fully charged a nimh pack starts with more voltage than a 2S lipo, around 9v+ with a nimh and 8.4v with a full lipo. Any ESC/receiver that can run a 6-cell nimh pack can run a 2S lipo with no problems.
racer1812 is offline  
Reply