I have been playing around with my setup for the BCE Chassis alot
this is what i am now running
I use the same setup on my Stock chassis aswell and its dialed. but the BCE makes a massive difference

Ride Height

Front = 38mm
Rear = 43mm


Droop

Front = 107mm
Rear= 128mm


Sway Bars

Front = 2.3mm
Rear = 2mm from buggy kit

Springs/Shock oil/Pistons/Location

Rough Track Front = black / 35wt / 55 / Middle on tower & Middle on arm
Rough Track Rear = white / 32.5wt / 56 / Out on tower & Middle on arm
Smooth Track Front = black / 32.5wt / 55 / Middle on tower & Middle on arm
Smooth Track Rear = white / 27.5wt / 56 / Out on tower & Middle on arm




Diffs

Front Diff = 7k
Rear Diff = 3k
Center-diff= 10k

Gearing/flywheel


Clutch= Losi Steel flywheel, 2 carbon with gold springs 2 MaxLife with silver springs
Clutchbell/spur gearing= 13/50


Toe/Antisquat

Front = 5* Out Total
Rear = 2.75/3

Losi adjustable toe blocks. Running all 0's in the front block set. 1's up in the forward rear block, 0's in the back rear block.

Camber

Front = -2
Rear = -3

Tire and Wheels
AKA's, Losi/GRP's and Prolines with GRP foams


Chassis, body and wing

chassis = BCE Speed
body = stock
wing = Team Associated RC8

Electronics/Battery and Battery Placement

stering Servo = Hitec 7955TG
Throttle/Brake servo = Hitec 7955TG
Battery = 2300mAh Intellect Lipo No regulator
Electronics = Sanwa M11X

Engine/Pipe/Plug/Fuel

motor = RB C6BBT L2G / RB WS7III L2G
Pipe = RB 2045 with 198 header / Thunder Tiger 2035 with OFNA long header
Plugs = Odonnell 99T
Fuel = NitroX Barmah Blend 39 30%

Camber Links, Hubs

front = 2 / A
rear = 3 / B
hubs = 1 spacer each side


Track Conditions. Hard pack, large jumps, various bite