View Single Post
Old 09-10-2009, 02:00 PM   #1538
Scott Fisher
Tech Elite
 
Join Date: Aug 2003
Location: Henderson, NV
Posts: 4,148
Trader Rating: 28 (100%+)
Send a message via AIM to Scott Fisher
Default

Quote:
Originally Posted by M.Abramowicz View Post
Hi!

IMHO there is nothing for low CG then two small o-ring ;-)
It should provide more flex then stock top deck.

In my combined Evo I cut off rear top deck mount like on pics, add some o-ring between plate and tank. Tank should NOT touch main chassis, if need more place,
just a little cut off some material from VZ211.



Regards!
m.
I did this about 1.5 years ago when I went to a lipo battery. I lowered my tank about 2mm and if I was a bit more motivated to do a bit of grinding on the chassis I could get another few mm's.
__________________
| Capricorn | Ybslow | Proline-Protoform | Johnny Bravo Racing | Desoto Racing | Murnan Modified | Matrix Tires | Powermaster Fuel |
Scott Fisher is offline   Reply With Quote