Originally Posted by
jlfx car audio
well i will try to give my set up
it started out as the stock rubber setup as a base line
went to 3deg total rear tow
-1 camber in rear
0 in front
324 springs in front
289 in rear
5min ride height
2.5 active droop (when tire lift off the ground)
front shocks top center hole
rear insecond to bottom
rear camber links are in the inside (at kit height)
widened the front by 3mm total
rear arms to moved to front
added 40g under front bumper
car weights in at 1477g
no let on chassis to balence it
i moved the batt out side of the chassis to balance it
HK Team Driver Won 2 times setup