Originally Posted by
Poltro
Hi all!
I was just wondering if someone could tell me how to remove the carby form my go 3ptR. I completely removed the screw that hold the carby but it wont move.
Also how many shims do you suggest for 25% and 30% nitro?
Thanks!
Loosen the pinch bolt screw a couple turns, lightly tap on the screw until it pushes the pinch nut out the other side, take all the way out. Turn the carb the direction that the remaining part of the pinch bolt is. (if it's on the right turn the carb right) it should break loose fairly easy, be careful not to overtighten when putting back together.
For 30% I use one silver and one thin brass shim, they come with 2 brass. You have to be very careful not to get dirt in the motor when taking the head off.
Rex