R/C Tech Forums - View Single Post - Zippy Hard Case, low voltage on Hyperion
Thread: Zippy Hard Case, low voltage on Hyperion
View Single Post
Old 09-08-2009 | 06:26 AM
  #8  
Lazer Guy
Tech Fanatic
iTrader: (1)
 
Joined: Jun 2007
Posts: 823
From: Adrian, MI
Default
Originally Posted by mschaffer66
My multimeter reads it at like 7.8v... I tried jumping it with the NiMH charger, no luck.
7.8v is fine for a 2 cell and should charge with out any trouble.
I had a similar problem with my 4 new 14.8 zippys....... It was the deans that came on them.
Try alligator clips on the deans and see if they will charge
The way I found it was I plugged the deans in 1/2 way and they worked.
I then used a very small screw driver and scraped some plastic off the inside and now there fine.
Last edited by Lazer Guy; 09-08-2009 at 07:00 AM.
Lazer Guy is offline  
Reply