Jammin X2 Truggy with new and used spares
Truck comes with everything included in the original kit. It DOES NOT include servos, receiver, engine, and exhaust. Comes with a set of Bowfighters (bowtie rear, crimefighter front) on ½ offset White OFNA rims. One tooth is missing off of the center drive gear. I've been running it like that, don't know when it happen. Also, the plastic upper B block is cracked. It's a 10 doller item. Great truck, just getting out of the hobby.
Spares include:
- King Heads rear 3 deg. Toe plate
- King Heads steering Ackerman plate
- Rear lower a-arm assemblies (left/Right) with uprights u-joints and bearings
- Front plastic c-hubs (left/Right), universal joints, bearings, and one lower a-arm
- 2 diff cases
- 3 diff housings with spider gears and NIP gaskets
- 17mm wheel hub adapters (4)
- Wing and chassis braces
- Front bumper parts
- Sway-bars and brackets (2.3, 2.5, 2.8)
- Front and rear Jammin blue spring sets
- New in package misc. radius rods, rod end housings, and balls
- New in package plastic servo saver set
- OFNA/Jammin clutch shoes and springs (.9, 1.0, 1.1) w/ sportwerks clutch tool
- Two 13 Tooth clutch bells
- Misc. plastic chassis and suspension parts
- Hardware including spare screw bag, shims and engine mounting screws
- OFNA plastic servo arms and parts
- Throttle/brake shafts, springs and hardware
- A bag of diff lubs, shock oils, and greases
- Two spare wings, one spare body, used but usable
- Bag of bearings (chassis and clutch)
Asking $450 shipped
Last edited by Purdue Engineer; 09-10-2009 at 05:07 PM.