Originally Posted by
makaluch
I just bought a Go Tech .25 6-port motor for my 8ight-T 2.0. I'm doing some research on the best pipe and I'm seeing that the 2047 is this engine's match made in heaven. So, I have a few questions...
- What pipe is a good alternative to the 2047?
- Best button/shim setup for running 20% ?
- Whats a good OS plug alternative to the recommended plugs?
I have a Losi RE11 (2050 copy) and a Dynamite 086. Unfortunately, we can only get Blue Thunder locally. It's fresh from the bashers usin it, but I don't completely trust the mix so I hold back on the perfect tune. We're just club level guys so I'd like a good balance between long life and performance. I'm an aggressive roll-on/roll-off guy so I prefer a smooth pull.
Any guidance and advice would be sweet. Thanks fellas!
Mark M.
if you get a chance get your self the 2072 pipe its a go tech pipe as for the plugs you can use a p3 or the odonnel plugs i use the OD 97 which are a med plug as for shimming if the motor is run in and your using 20% i would use a .2-.3 of shims under button check out massives web site under tech tips great info will help you out
