Originally Posted by
tristyn
Ha Monty,
Looking to change clutch sys. and wondering what you would suggest. Currently I am running the fioroni clutch in buggy & truggy 70/30 split, on the .28 1 hard & 2 standard, the .21 1 standard & 2 hard. I like the maintenance of the clutch and it works great in the .28 but on the .21 it has a slight bog off the bottom. Looking for a clutch that grabs strong & has good durability. I have not ran a standard 3 shoe alum. in a few yrs. but I remember there was a lot of maintenance.( constantly filing shoes, bearing and spring replacement. Any suggest. would be appreciated. Have heard the m2c 4 shoe were good clutch set ups.:
i run the kyosho cars and use 3 blue alu. shoes ( sometimes two blue and 1 silver(hard) shoes ) with 1.0mm springs and get pretty decent life out of the whole setup but yes there is maintenance . the fioroni turbo twin that you are running works well in low bite surface to reduce a little wheelspin and take some torque out of the engine . fioroni clutches were all i used to run about 4-5 yrs. ago
