Originally Posted by
trdsupra88
I am running a similar setup and it is fast enough...check your ESC setting with the link to see if something changed. I am running on an 1/8th track with 17/87 and smaller LiPos and keep up with 10 and 13.5s
4600 is slow !
The problem is if you goto a 5700 you have to leave the punch controll @ 0, and you have to keep the motor timing on low. Altho everyone that told me a 5700kv would be to fast, i have to say you are wrong, 1/4 the way down the straight im to the floor all the way into the sweeper.
Im going to do a ball diff this weekend and it will be totally dialed.