R/C Tech Forums - View Single Post - Team Magic E4 Thread
View Single Post
Old 08-25-2009 | 05:57 PM
  #2478  
wyd's Avatar
wyd
Tech Legend
iTrader: (51)
 
Joined: Sep 2001
Posts: 21,220
From: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Default

Originally Posted by Solara
Do you guys find all these NEWER 30C 35C 40C or whatever mah lipo any BETTER, FASTER more PUNCH then some good old Orion 3800..? When you guys dealing with fitting lipo on E4RS, it is NOT a easy task. Battery with the SIDE exit power lead, or above exit power lead are PAIN to deal with (on E4RS)...

I used my left over 3600 and 3800 Orion with bullet plugs on my E4RS since day 1...ran indoor and outdoor, and I just don't see it is any slower/worst then my SMC5000, IB5000....etc. However, in order for me to fit the IB or SMC batteries...it is a total nightmare (ok, it is MY OWN nightmare...someone might like to do modification, I don't)...I have to add shim, remove the middle bridge, or add shim under the bridge, then find way to pull the battery lead to the speedo AND hope the side belt won't rub the wires...

If you can shell out extra $70...get yourself a 3800 Orion (or someone said Orion 4800 silver block will work too) and dedicated that for your E4RS. Again, it is LIPO...I race it, then charge it, and do it over and over...without even let it cool (well, I have plenty of time in between so it is cool enough to charge) and all my batteries are more then 1 years old...and still strong.

The best part is...my E4RS does not need to add shim or having that ugly dean plugs and wire all over. Direct bullet plug in the battery is what E4RS design for...by all mean, buy the bullet plug LIPO rather then the lead wire version.
If you can try a 4100 SMC lipo. I run the pack with wires coming out the front left side by the belt. The SMC packs fit well with the stock tray and since the all wires on them come out the top of the left front of the battery they fit perfect and don't come anywhere near the side belt. One of the best fitting packs I have found that have the built in wire setup. Now I did shim everthing up 2mm like the book shows for taller packs but the 4100 SMC could get away without doing that. I just have some stick on foam that I used under the top deck to take up any unwanted room from the batter to the topdeck. Works great.
wyd is offline