Originally Posted by
cyber3d
The TB-02 stock motor mount (and alum hop up mount) has 4 positions. So you can run pinion gears from 16T to 25T. Spurs from 55T, 58T, and 61T.
Resulting in ratios 9.91 down to 5.72
Victor
When I use the 61T spur, and 16T pinion in my TB02, will this mesh in the 4 holes adjustment?
Because I installed a 61T spur and want to buy the 16T pinion, I just dont know if it will mesh there within the 4 holes adjustment.