R/C Tech Forums - View Single Post - Tekin RS/RS PRO on 1s Lipo Q&A
View Single Post
Old 08-11-2009, 02:40 PM
  #203  
Fred_B
Tech Addict
iTrader: (1)
 
Join Date: Mar 2008
Posts: 650
Trader Rating: 1 (100%+)
Default

Originally Posted by mangoman
Hi i was wondering if anyone here has tried running the RS Pro with a mod motor in 12th scale LiPo? Looks like you guys are mainly running spec motors.

We have an unusually large track where we are experimenting with 4.5s and 4600 NiMhs, but they are dumping. I suspect that moving to a 3.5 lipo aint gunna be fast enuff or make run time. Anyone got any feedback?

Thanks,
Martin
I've run down to a 4.5 with the regular RS but I would highly recomend the pro for mod. I made time with a 4.5 Novak motor and SMC 4000 pack with no problems indoors other than a really hot speedo.

If you guys are having problems dumping try running the newer V200 software and experiment with the new boost setting. This should let you run a smaller motor 6.5 or 5.5 and still get some decent speeds on the straight. Just start out really low on the turbo and tune from there (be careful).

LiPo is probably going to bring some driving technique back into mod because of the limited mAh available.
Fred_B is offline