R/C Tech Forums - View Single Post - Throttle Return Spring Problem
Thread: Throttle Return Spring Problem
View Single Post
Old 08-09-2009 | 07:11 PM
  #8  
scwrod's Avatar
scwrod
Tech Master
iTrader: (2)
 
Joined: Apr 2008
Posts: 1,420
Default
Originally Posted by Integra
Imo using a Really tight throttle return will only lead to a bound up carb...i would use a band with enough force to close the Carb ONLY no linkages attached.....you arent going to pull the servo's back to idle if they fail at WOT or go to WOT during the run away.
+1 That is the only reason to run a throttle return spring. If the throttle ball cup comes off you want to close the carb.
scwrod is offline  
Reply