Originally Posted by
zonda
Just got the 5 port in the post this morning
looking at it I think its a Gen 4.
what glow plugs do you guys recomend ? will be using Byron Race 2500 Gen2 25% Fuel.
Cant wait to get this thing going....have to wait for my clutch system, pipe and a new starter box first though
Sweet
Depending how many tanks it has had through it, it will most likely be very tight still. Make sure you heat it well with a hair dryer or paint stripping hot air gun before you start it. This makes it so much easier to start, and is a lot better for the engines internals too. You should heat the motor before you start it whenever possible. And always return it to BDC when you stop it.
Running 25% fuel you can run a medium or hot plug. Ideally, with 25% a medium plug is the most suited (say - O'Donell 97T or RB #6). The GO motors seem to be able to handle a hotter plug, so depending on ambient temps and conditions you may like to try a hot plug (say - O'Donnell 77T or RB #5), the OS P3 UltraHot plug is also used by a lot of the guys. I tend to run the medium plugs on 25% most of the time, and they work very well.