R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 08-06-2009 | 11:15 AM
  #8141  
Gizmatron's Avatar
Gizmatron
Tech Master
iTrader: (12)
 
Joined: Jan 2009
Posts: 1,006
From: normandy,france
Default

Originally Posted by sky510
giz

do you have link for the taper drill piston you're using?

thanks
I can give you the part numbers then just search for those on amain..I couldn't find them using any other search..KYOIFW405-138 are the 1.3mm which are the standard or middle size..KYOIFW405-128 and KYOIFW405-148 are respectively the 1.2mm and 1.4mm all 8 hole....I ordered 4 of the 1.3 and a pair each of the 1.2 and the 1.4...currently running 1.3 with 300 oil at the back and 1.2 with 350 at the front..
Gizmatron is offline