HPI Honda Civic EK9 225mm body w/ ABC mesh wheels and tires.
I have to admit the car was a pain to put together but with patience the car will go together well. The CR is very competitive against the ABC Genetics mini here where I race in Socal. I almost gave up on the car to buy an ABC but gave it time and I am very happy with the results of the car. I have only broken one front hub carrier by brushing up against the wall and have been racing with it for almost 3 months. Hope my set-up will help others....Good luck fellow CR owners and have fun...I know I am!
Here is my set-up for WCRC high bite asphalt track.
Front
Gear diff w/ black spring installed
Gold springs w/ 40wt oil
Gold sway bar
Top upper position on shock tower (stock)
No Spacer under front gear case (using 54mm tires)
4.5mm of droop under front arm
4mm ride height
-2 degrees of front camber
-1 degrees of front toe
Rear
Black springs w/ 40 wt oil
Black sway bar
Middle hole on rear shock tower (Carbon fiber)
No spacer under gear case (using 54mm tires)
4mm droop under rear arm
4mm ride height
3 degrees of rear toe (stock)
-2 degrees of camber
225mm wheel base
Mabuchi silver can 540 motor
FDR 4.0
Novak GTX esc
Novak 2 cell lipo cutoff module
Airtronics 737 servo
Airtronics 2.4 receiver