R/C Tech Forums - View Single Post - Binding a DX2 to SR3000
Thread: Binding a DX2 to SR3000
View Single Post
Old 08-05-2009 | 07:02 PM
  #3  
RCGaryK's Avatar
RCGaryK
Tech Champion
iTrader: (3)
 
Joined: Sep 2003
Posts: 7,331
From: Champaign, IL
Default
Originally Posted by fvrr
I have a new DX2 I got for my daughter and a used SR3000. The radio seems to bind fine but the rx just has a quick flash of green and nothing else. I've tried it with a bind plug and without. If it make a difference it's in a stock slash.
SR3000 doesn't use a bind plug it has a bind button.



Make sure you have your polarity correct too with the plugs. I know on the SR3500 if you have the ESC or receiver pack plugged in backwards it will flash twice, pause, flash twice, pause. Haven't run into that issue with the SR3000 but then again it's been 3 years since I've run one.
RCGaryK is offline  
Reply