Originally Posted by l.urbain

Hi Guys !


Comments :
Flex : Cut top deck for more flex, Alu stands not used, 2 screws removed under rear bulk head, Plastic battery trail mounted with 2 screws.
Tire aditive : LRP Top grip Asphalt, 30minutes, 50°C.


Concerning the battery trail, it is hold by the 2 rear screws and two home made parts which allow to remove the rear stands. As I use the plastic trail only two srews are needed.


I always use high roll centers, high front diff and low rear diff because it is usually faster like this but it may change when track conditions are very unusual (Low grip, rain...).