Originally Posted by
jag88
Thanks Korey, that's the one thing I haven't tried yet ( raising the roll centers ).
I put the posts in and found an old graphite rear deck so lets hope the higher roll centers do the trick.
I pretty much only run on high bite carpet...
1mm under all of the blocks for roll center...
Silver sway bar in the rear
60Wt (Losi) oil up front with 1.1 pistons
40Wt (Losi) oil in the rear with 1.1 pistons
camber links angled up front and pretty flat in the rear.
2deg camber all the way around.
1.5mm droop front and rear over ride height (sounds like a small amount but the car loves it)
3deg block in the rear
1.5mm front sweep (1.5 block up front)
Jaco blues
1-6-2-0 on my TC spec (The drag break has a big affect over corner speed, so play with this until you find something you like)
Jack the gripper Rear full; front 1/3 inside
hope this helps if you want more specific setup please let me know I can post one.