R/C Tech Forums - View Single Post - lrp spx stock spec
View Single Post
Old 07-25-2009, 06:15 AM
  #500  
SlowerOne
Tech Fanatic
 
Join Date: Jun 2005
Posts: 900
Default

Originally Posted by tellan
Just puchased a SPX to run in my 1/12th 8 min indoor carpet racing.
Plan to use a 7.5bl and 10.5 bl

Looking for some profiles. Tried a few on the bench but the brakes etc have me puzzled.
Throttle is straight forward but need some advice on the brake settings.
Start on profile 6 for the throttle, and '0' on both brake profiles - we don't use brakes in 12th! For the four speedo settings, you will have 2,6,0,0.

This will give you some additional motor timing, no drag brake, and fully proportional brakes when you pull the stick back. Profiles 7 and 8 adjust the timing 'on-the-fly', but we have not made them work in 12th. It seems the cars are too fast on acceleration, and there is not enough time between corners, for the timing software to have a good effect. HTH
SlowerOne is offline