R/C Tech Forums - View Single Post - TQ Racing SX8
Thread: TQ Racing SX8
View Single Post
Old 07-21-2009, 06:19 PM
  #2093  
Disel760
Tech Apprentice
 
Disel760's Avatar
 
Join Date: Jan 2008
Location: Charlotte N.C
Posts: 65
Default

Originally Posted by Disel760
Hey guys Liam had a good weekend. I put together a new car for him I was up till 3am in the morning after practice Friday to Saturday. Racing started at 9:30am Saturday didn't really have time to set the car up right. With really fast guys running the East Coast Nitro Series. I decided to run Liam in sportsman class, he wasn't very happy about that. In sports man class he placed 3rd with really fast guys also after a flame out. I wish the main was 45 min and not 30min once he got going he was on rails. So here is what Liam was running SX-8 Ver.2008.5 Let me explain I brought light weight front and rear outdrives and beveled gears. Light weight center brake
outdrives is what I got from TQ racing. Light weight chassis braces Kyosho 48 tooth light weight spur gear 14 tooth clutch bell. I tryed to keep the car all plastic as far as all the blocks to keep it as light as possible. After a few teaks the car was on rails. He did break the rear plastic block switched it to alum block. The car felt way differant then the 2008 car. So right now Liam is running a 2008.5 car. We will get a 2009 version as soon as they come in. Thanks Luther and Jesse for getting the parts out so quickly.http://www.carolinasrc.com/forum/for....asp?TID=19288
Finally I got to download the videos of the East Coast Nitro Series Rd 3 at the farm on you tube
http://www.youtube.com/watch?v=Wr5t4...e=channel_page
http://www.youtube.com/watch?v=_7yE1...e=channel_page
http://www.youtube.com/watch?v=B_5JS...e=channel_page
Disel760 is offline