Originally Posted by
lutach
The Xerun is a good ESC and it would be wise to get the Xerun 120A instead of the more expensive highly over rated SP one which is the same as the Xerun 120A 2.0. The one I have is one of the first units built that I tested for HW.
hi LUTACH
ive had problems with my ezrun setup im running a 150a esc and a 2350kv ezrun motor with 2 5400 2 cell lipos 28c anyway the firts one fried the motor and speedy within 3 charges i sent it back and they said the speedy had a problem they sent a new motor and esc this time i notice they set the punch and timming lower and now the 2nd charge it has fried again this time i was 6min into the run and the buggy(hyper9e) lost steering and power i have test the servo seperatly and its fine can u HELP I DONT WANT TO RUN THIS SETUP IF ITS GONG TO HAPPEN AGAIN CAN U SUGGEST ANYTHING ANYONE