R/C Tech Forums - View Single Post - 8T 2.0 Setup sheets....post here
View Single Post
Old 07-14-2009 | 03:08 AM
  #8  
TIX's Avatar
TIX
Tech Master
iTrader: (17)
 
Joined: May 2008
Posts: 1,975
From: Melbourne Australia
Default

Ride Height

Front = 39mm
Rear = 42mm


Droop

Front = 110mm
Rear= 130mm


Sway Bars

Front = 2.3mm
Rear = 2.3mm

Springs/Shock oil/Pistons/Location

Front = black / 35wt / 55 / Middle on tower & Middle on arm
Rear = white / 32.5wt / 56 / Out on tower & Middle on arm




Diffs


Front Diff = 7k
Rear Diff = 3k
Center-diff= 10k

Gearing/flywheel


Clutch= on my RB C6 i use a Losi Steel flywheel, 2 carbon with green springs 2 MaxLife with gold springs. on my RB WS7 i use a Losi aluminium flywheel, 2 carbon with gold springs 2 MaxLife with silver springs
Clutchbell/spur gearing= 13/50


Toe/Antisquat

Front = 2* Out
Rear = 3.25/3

Losi adjustable toe blocks. Running all 0's in the front block set. 1's up in the forward rear block, .5's out in the back rear block.

Camber

Front = -2
Rear = -3

Tire and Wheels
AKA's, Losi/GRP's and Prolines with GRP foams


Chassis, body and wing


chasis = stock
body = stock
wing = Team Associated RC8

Electronics/Battery and Battery Placement

stering Servo = Hitec 7955TG
Throttle/Brake servo = Hitec 7955TG
Battery = 1600mah hump pack
Electronics = Nomadio React

Engine/Pipe/Plug/Fuel

motor = RB C6BBT L2G / RB WS7III L2G
Pipe = RB 2045
Plugs = Odonnell 99T
Fuel = NitroX HB7333

Camber Links, Hubs

front = 2 / A
rear = 3 / B
hubs = all the way forward


Track Conditions. Hard pack, large jumps, various bite
TIX is offline