Originally Posted by MarkBrown

I recently bought my first RS, with Hotwire. I found the learning curve to be rather steep. I needed to read many, many posts in this thread to figure things out. The results are worth it, but Tekin would do better if getting started were easier.

So I wrote a short document (attached) that summarizes what I learned by reading all those posts and by using the RS with Hotwire. I hope it will help others come up to speed more easily.

If you don’t have Word on your PC you can still read the document by downloading the free reader:

http://www.microsoft.com/downloads/d...displaylang=en

Please provide feedback via PM rather than cluttering up the thread. Cheers,