Originally Posted by
davidg01234
oh yes same thing happened to me, just take the enginbe out and take the clutch bell off and look at your clutches they are most likely stuck out grabbing the clutch bell
And if they are not stuck on the bell they are stuck to the flywheel. You would know this if you would spin the bell. If it moves freely and I mean silky smooth than they are stuck on the flywheel or you have a broken spring.
It should take you less than 5 minutes to check this out. Dont worry your not going to break anything except for stripping out the 2mm,3mm,5/64 metric/standard hex bolt. You have to do this first so get to it and let us know.
Is it maybe that you dont have the tools yet and that is what is taking to long. If so chances are you have some allen wrenchens laying around. There not the best but will do for now.