Originally Posted by
Stanton
If the flywheel is the same as the pro kit...Use a small Crescent wrench to hold where the square part of the flywheel is and use a 9mm glow plug wrench to remove the nut. Hold the end of the crankshaft against a hard surface. Take the handle of the glowplug wrench and smack the back of the flywheel and it will pop right off. (if you hit it right).
It sounds like it is the same flywheel as what is on the pro kit. Although it is not perfectly square there may be enough material to get some bite with a crescent wrench.
Okay sounds like I might have a few options.
In terms of the smacking of it using the glowplug wrench, I tend not to have those things work for me very easily.
Instead I bought a battery terminal puller to help me remove the flywheel.