R/C Tech Forums - View Single Post - Cells not holding voltage?
View Single Post
Old 07-03-2009 | 10:46 AM
  #3  
rcracer422
Tech Apprentice
 
Joined: Jul 2009
Posts: 85
Default

125268 is my order number.

I was told by live chat that the cells bouncing around from 4.19 to 4.2 volts was not a problem? Is this true? I do not want to have to return these unless there is a problem, I paid for express shipping for a reason, I do not want to have to go with no truck for a week or more.

Another issue I have with these batteries is yesterday my truck was going pretty slow and seems like it was running on 7.4v batteries. Once I put the batteries on the charger they read 3.6v per cell. Should be plenty of power but once re charged they worked ok again. I have not got them down that low again but I am thinking that when they got that low they could not hold voltage under load, thus running very slow. I know this is not normal because my thunder power lipos do not and have not done this or have the charging issues these have been giving me.
rcracer422 is offline